Backrest Seat Adjustment Switch

Backrest Seat Adjustment Switch

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Switch off ignition.

- Remove backrest release operating knob - 1 -.






- Position a screwdriver in - direction of arrow - and pry trim - 2 - out of mounts.

• When installing, operating knob securing spring must be replaced.

- Loosen switch - 1 - from trim - 2 -.






- Disconnect wiring harness from switch.

Installation

- Install in reverse order of removal.