Diagram 82/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Clutch Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G476 - Clutch Position Sensor

J104 - ABS Control Module Overview of Control Modules

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM), in plenum chamber, center Overview of Control Modules

J743 - Direct Shift Gearbox (DSG) Mechatronic Overview of Control Modules

T5m - 5-Pin Connector

T11b - 11-Pin Connector

T11c - 11-Pin Connector

T16k - 16-Pin Connector

T20e - 20-Pin Connector

T47 - 47-Pin Connector, on ABS with EDL/ESP Control Module

T47a - 47-Pin Connector, on ABS with ESP Control Module

T94 - 94-Pin Connector

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections In Interior

(367) - Ground Connection 2 (in main wiring harness)

(382) - Ground Connection 17 (in main wiring harness)

(389) - Ground Connection 24 (in main wiring harness)

(605) - Ground Connection (on upper steering column) Overview of Ground Connections In Interior

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with manual transmission

** - Only applicable to US/CDN

*** - Only models with direct shift gearbox 02E (DSG)

Previous Diagram 82/14 (Tracks 169-182)

Next Diagram 82/16 (Tracks 197-210)