Diagram 82/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Intake Air Temperature (IAT) Sensor, Engine Coolant Temperature (ECT) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G42 - Intake Air Temperature (IAT) Sensor 2.0L CCTA, CBFA and BPY Overviews

G62 - Engine Coolant Temperature (ECT) Sensor 2.0L CCTA, CBFA and BPY Overviews

G186 - Throttle Drive (for Electronic Power Control (EPC) 2.0L CCTA, CBFA and BPY Overviews

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) 2.0L CCTA, CBFA and BPY Overviews

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) 2.0L CCTA, CBFA and BPY Overviews

J338 - Throttle Valve Control Module 2.0L CCTA, CBFA and BPY Overviews

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM), in plenum chamber, center Overview of Control Modules

T4x - 4-Pin Connector, on coolant fan, bottom left

T6x - 6-Pin Connector

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D111) - Connection 9 (in engine compartment wiring harness)

*** - Coolant Fan Connector

Previous Diagram 82/7 (Tracks 71-84)

Next Diagram 82/9 (Tracks 99-112)