Front Level Control System Sensor Assembly Overview

Front Level Control System Sensor Assembly Overview

• A replacement front left and right level control system sensor (G78/G289) comes complete with the coupling rod and the upper and lower retaining plate.

• Replace with subframe installed.






1 Subframe

2 Bolt

• M6 x 16

• 9 Nm

3 Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)

• Complete with components.

• Lever - arrow - must point toward vehicle exterior.

• Removing and installing, refer to => [ Front Level Control System Sensors ] Front Level Control System Sensors.

• if the left front level control system sensor (G78) and the right front level control sensor (G289) were removed and installed, then a basic setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection.

• After replacing, perform basic setting of the headlamps using Vehicle Diagnostic Tester in Guided Fault Finding function.

4 Control Arm

5 Nut

• 9 Nm

• Self-locking

• Always replace if removed.