Operation CHARM: Car repair manuals for everyone.

Part 2





Special Tools

Special tools, testers and auxiliary items required

Extractor Lever (VW 681)

Bracket (30-211 A)

Thrust Piece (T10042)

Drift (T10169) or (T10362)

Thrust Piece (T40008)

Hot Air Blower (V.A.G 1416)

Thrust Piece (T10143)

Press Tool for Shaft Seal (T10180)

Driving Sleeve (VW 244 B)

Thrust Plate (VW 401)

Thrust Plate (VW 402)

Punch (VW 407)

Tube 37 mm Dia. (VW 416 B)

Guide Piece (VW 436 A)

Guide Pin (VW 439)

Holding Fixture (VW 801)

Guide Piece (10-15)

Thrust Pad (3124)

Bearing Driver (3264)

Subframe Support Assem. Device (3290)

Drift (T10168)

Thrust Piece (T10203)

Punch (VW 411)

Tube Trans. Drive Shaft (VW 426)

Thrust Pad 16.5/28 mm Dia. (VW 431)

Triple Square Socket Driver (3357)






Connecting Pin (T10027 A)






Hose Clamp Pliers (V.A.G 1275)






Sleeve (VW 423)






Pulling Hook (T20143/1)






Thrust Block (T10083)






Socket and Extended Bit (T10107) or (T10107 A)






- 1 - Kukko Puller 12-14.5 mm (21/1)

- 1 - Kukko Extractor 14.5-18.6 mm (21/2)

- 1 - Kukko Extractor 18.5-23.5 mm (21/3)

- 1 - Kukko Extractor 23.5-30 mm (21/4)

- 3 - Kukko Separating Tool 5-60 mm (17/0)

- 4 - Kukko Support (22/1)

- 4 - Kukko Support (22/2)

Threaded Adapter from Kukko Support (22/1)






Trim Removal Wedge (3409)











Special tools, testers and auxiliary items required

Engine Support Bridge (10-222 A)

Engine Support Feet (10-222 A/8)

Engine Support Adapter (10-222 A/3)

Adapter (10-222 A/18)

Transmission Support (3282)






Special tools, testers and auxiliary items required

Pin (3282/29)

Adjustment Plate (3282/33)

Transmission Support Jig (3336)

Torque Wrench (5-50 Nm) (V.A.G 1331)

Torque Wrench (40-200 Nm) (V.A.G 1332)

Engine-/Gearbox Jack (V.A.G 1383 A)






Special tools, testers and auxiliary items required

Bracket (T10346)

Engine Support Device (3300 A)

Adapter (VW 771/40) from Slide Hammer-Complete Set (VW 771)

Hose Clamps up to 25 mm Dia. (3094)






Special tools, testers and auxiliary items required

Holding Plate (VW 309)

Holding Fixture (VW 313)

Transmission Support (VW 353)

Thrust Tube (VW 455) or Sleeve (3160)

Slide Hammer-Complete Set (VW 771)

Sleeve (30-21)