Adjusting Height and Parallel Alignment

Adjusting Height and Parallel Alignment

• Side window height adjustment is OK when upper edge of door window and upper edge of side window are the same height.






• The rear lid is adjusted.

- Remove side trim.

- Loosen nuts - 2 - and lock nut - 3 -.

- Adjust side window with window regulator in elongated holes.

- Tighten nuts - 2 - and lock nut - 3 -. Tightening specification: 10 Nm.

- Perform a function check and check adjustment with roof open and closed.

- Check adjustment dimension of side window with roof closed. Refer to => [ Side Window Adjustment Dimensions ] Side Window Adjustment Dimensions.

If adjustment ability at window regulator connection is not sufficient, there are adjustment possibilities on side window to window regulator connection.