Mirror Glass

Mirror Glass

• The following describes removing and installing the left mirror glass only. Removing and installing the right mirror glass is identical.


Wear protective eyewear and gloves when working.

Removing






- Protect the housing edge from paint damage, for example, cover using fabric-reinforced adhesive tape.

- Press the top of mirror glass - 1 - into mirror housing - 2 -.

- Pry mirror glass - 1 - using the wedges (T10383) out of bracket - 4 - and housing - 2 -.

- Swing mirror glass - 1 - to the side - arrow - and disconnect installed connector terminals - 3 - for the electric dimming function and mirror heater from the rear side of mirror glass - 1 -.

Installation

- Insert connector terminals for mirror heater to mirror glass.

- Press mirror glass at center onto holder in housing.

- The mirror glass will engage with a click.

• Then perform a function test.