Trim

Trim

• Removing and installing is described only for the left trim. Removing and installing right trim is derived accordingly from this.

Removing

• If retaining hook - 5 - breaks at the turn signal, a new turn signal with housing part must be installed.






- Remove mirror glass.

- Remove the bolts - 2 -.

- Press trim - 1 - and mirror base plate - 4 - carefully apart - arrow a -.

- Lift the trim carefully over retaining hook - 4 - of the turn signal - arrows b -.

- Release retaining hooks - 3 - from the mirror base plate using a screwdriver - c arrows -.

- Remove the trim - 1 -.

Installation

Install in reverse order of removal.

• Then perform a function test.