Roof Center Section, Adjusting

Roof Center Section, Adjusting

• In order to adjust roof center section, roof must be completely closed and locked. Vehicle must be resting on the wheels, which are on the ground.

• After adjusting roof center section, CSC roof functions may not be constricted.

• The adjustment should not cause any tension in the roof center section.






The height to adjacent components is adjusted with spacer plates - 3 -.

• The installation lengths of screws in threads - 2 - on roof center section - 1 - must always remain the same.

• If a spacer plate - 3 - is added, a washer - 4 - must be removed from the threaded connection - 5 -.

• If a spacer plate - 3 - is added, remove a washer - 4 - from the threaded connection - 5 -.

The gaps to the adjacent components are adjusted within the elongated holes in the threaded connections.

Gap dimensions, refer to => [ Roof Center Piece Gap Dimensions ]