Diagram 17/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Data Bus On Board Diagnostic Interface, Safety Belt Warning Lamp, Airbag Malfunction Indicator Lamp (MIL)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J234 - Airbag Control Module Overview of Control Modules

J285 - Instrument Cluster Control Module Overview of Control Modules

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

K19 - Safety Belt Warning Lamp

K75 - Airbag Malfunction Indicator Lamp (MIL)

T12n - 12-Pin Connector

T16 - 16-Pin Connector, data link connector (DLC), under instrument panel, left

T20 - 20-Pin Connector

T32 - 32-Pin Connector

T36 - 36-Pin Connector

T52c - 52-Pin Connector

T75 - 75-Pin Connector

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Through April 2009

** - From May 2009

Previous Diagram 17/6 (Tracks 57-70)