Diagram 36/20 (Tracks 253-266)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Oil Level Thermal Sensor, Malfunction Indicator Lamp (MIL), Fuel Gauge, Engine Coolant Temperature (ECT) Gauge, Oil Pressure Switch, Oil Pressure Warning Lamp, Warning Buzzer





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G1 - Fuel Gauge

G266 - Oil Level Thermal Sensor Locations

G3 - Engine Coolant Temperature (ECT) Gauge

G32 - Engine Coolant Level (ECL) Sensor Locations

H3 - Warning Buzzer

J285 - Instrument Cluster Control Module Overview of Control Modules

J519 - Vehicle Electrical System Control Module Overview of Control Modules

K3 - Oil Pressure Warning Lamp

K31 - Cruise Control Indicator Lamp

K38 - Oil Level Indicator Lamp

K83 - Malfunction Indicator Lamp (MIL)

K105 - Fuel Reserve Warning Lamp

T2cw - Double Connector

T3x - 3-Pin Connector

T6z - 6-Pin Connector, near left headlamp

T14b - 14-Pin Connector, near starter Overview of Connector Stations and Connectors

T36 - 36-Pin Connector

(410) - Sensor Ground Connection 1 (in main wiring harness)

(D203) - Oil Pressure Switch Connection (in instrument panel wiring harness)

* - Models with extended service intervals

Previous Diagram 36/19 (Tracks 239-252)