Secondary Air Injection System, Right Combination Valve

Right Combination Valve

Removing

- Disconnect the rear vacuum hoses - 1, 2, and 4 - from the intake manifold and free them up.






- Remove wiring connection from intake manifold - arrow - and lay back with hoses connected.

- Remove the bolts - arrows - and bracket - 1 - for the heat shield.






- Disconnect the vacuum hose - arrow -.






- Remove the bolt - 1 - and remove the right combination valve for the Secondary Air Injection (AIR) from the AIR hoses - 2 and 3 -.

Installing

Installation is performed in reverse order of removal, noting the following:

• Replace the seals

• Tightening specifications, refer to => [ Secondary Air Injection System Overview ] Secondary Air Injection System Overview.