Secondary Air Injection Pump Motor

Secondary Air Injection Pump Motor

Removing

- Disconnect secondary air hose at the position indicated by the - arrow -.






- Free up the air hose leading to the Secondary Air Injection (AIR) pump motor (V101).

- Remove the center noise insulation.






- Free up the coolant hose at the bottom on the fan shroud.






- Disconnect the electrical connector - 3 - at the AIR pump motor and free up electrical wiring.

- Remove the coolant pipe bracket - 2 - to transmission oil cooler.

- Remove the bolts - 1 -.

- Loosen the bolt - 4 - and remove the AIR pump with bracket.

Installing

Installation is performed in reverse order.

Tightening specifications, refer to => [ Secondary Air Injection System Overview ] Secondary Air Injection System Overview.