Engine Control Module, without Anti-Theft Immobilizer

Engine Control Module, without Anti-Theft Immobilizer

• If it is desired to replace the Engine Control Module (ECM), connect the vehicle diagnostic tester and perform the guided function "Replace Engine Control Module (ECM)".

Removing

- Turn off the ignition.

- Remove the windshield wiper arms, plenum chamber cover and plenum chamber facing wall.

- Disconnect the front connector - 1 - from engine control module.






- Pry up the locking mechanism - 2 - slightly.

- Slide the ECM out of the bracket in the direction of the - arrow -.

- Disconnect the rear connector from the ECM.

Installing

- Connect and lock the rear connector to the ECM.

- Slide the ECM into the bracket.

- Connect and lock the front connector to the ECM.

- Install the plenum chamber bulkhead, the plenum chamber cover and the windshield wiper arms.