Tire Pressure Sensor Assembly Overview

Tire Pressure Sensor Assembly Overview






1 Tire Pressure Sensor

• Supplied complete as a service part

• Removing and installing, refer to => [ Tire Pressure Sensor ] Service and Repair.

• When battery is discharge, the entire tire pressure sensor must be replaced.

• After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.

2 Valve Core

• Replace at every tire change

• Use only original manufacturer's valve insert, it has a special coating!

3 Sealing Washer

4 Seal

• Is slightly deformed when tightening the union nut => [ (Item 6) Union Nut ].

5 Disk Wheel

• Mounting tires (wheels with tire pressure monitoring system). Refer to => [ Tire, with Tire Pressure Monitoring System ] Removal and Replacement.

• Mounting tires with emergency running characteristics.

6 Union Nut

• 8 Nm

7 Valve Cap

• Use only original valve caps from the repair set.

• Do not use Comfort valve caps and metal caps.