Bolts and Nuts

Bolts and Nuts






• Loosen or tighten bolts and nuts for the covers or housings diagonally.

• The tightening specification stated apply to non-lubricated nuts and bolts.

• Use a wire brush to clean the threads of bolts that were installed using locking fluid. Install the bolts using AMV 185 100 A1 (liquid locking fluid).

• Use a thread tap to clean all threaded holes containing self-locking bolts to remove any locking fluid residue. Otherwise the bolts could shear the next time they are removed.

• Always replace self-locking nuts and bolts.