Door Window, Adjusting Angle to Roof Pillar Seal

Door Window, Adjusting Angle to Roof Pillar Seal






• The door and roof are adjusted.

• The door window is adjusted in direction of travel.

- Remove cover caps - 2 - on lower edge of door.

- Loosen bolts - 1 -.

- Adjust angle - arrow b - of window regulator - 3 - with door window via elongated holes - arrow a - so door window run into seal without offset.

Screw tightening specification: 8 Nm

- Perform function test and check adjustment. First with roof open, then with roof closed.

- Check adjustment dimension of side window with roof closed. Refer to => [ Door Window Adjustment Dimensions ] Door Window Adjustment Dimensions.