Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button

Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.

• To remove the Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) , anti-theft warning system must be deactivated.

• Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button are located in door trim storage compartment on driver's side.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button using (VAS 3409) or a screwdriver.






- Release and disconnect the connector - arrow -.






Installation

Installation is performed in the reverse order of removal.