Rear Lid, Adjustment Buffer, Adjusting

Adjustment Buffer, Adjusting

• The following adjustment is only for the right adjusting buffer. Adjustment for the left adjusting buffer is derived accordingly from this.

• A new adjusting buffer is delivered locked.

- Press the adjusting buffer - 1 - together - arrow a - and turn it 45° - arrow b -.






- Loosen the clamping screw - 2 - far enough until it is visible inside the rubber buffer.

- Now pull the adjusting buffer - 1 - out slightly.

• Lock carrier cover - 3 - is installed.

- Close rear lid - 2 -.






Adjustment buffer adjusts itself automatically.

- Open rear lid again.






- Install the locking screw - 2 - on the adjusting buffer - 1 - to a depth of - dimension a = 20 mm + +5 mm -.

- Press the adjusting buffer - 1 - together - arrow a - and turn it 45° - arrow b -.






- Check the adjustment