Rear Lid Latch

Rear Lid Latch

• If rear lid does not open, it can be opened by hand using the emergency release.

• The emergency release is behind the pass-through cover. Refer to => [ Rear Lid Emergency Release ] Rear Lid Emergency Release.

Removing

- Remove the rear lid trim panel.






- Remove anti-theft cover - 1 - from lid lock - 2 -.

- Disconnect electrical harness connector - 4 - from lid lock - 2 -.

- Remove the hex nuts - 3 - and remove lid lock - 2 - from the rear lid.

Installation

- Install lid lock - 2 - on to rear lid and install hex nut - 3 -.






- Tightening specification for nuts - 3 -: 8 Nm.

- Connect electrical harness connector - 2 - to lid lock - 1 -.

Install in reverse order of removal.

• Perform a function test on the unlocking components before closing the rear lid.