Turn Signals

Turn Signals

• The following describes removing and installing the left turn signal. Removing and installing the right turn signal is identical.

• LEDs with a long service life are installed in the side turn signals instead of standard bulbs.

• It is not necessary to replace the LED. The entire turn signal must be replaced if damaged.

Removing

- Mirror Glass, Removing, refer to => [ Mirror Glass ] Mirror Glass

- Remove the mirror housing, refer to => [ Mirror Housing ] Mirror Housing

- Remove trim. Refer to => [ Trim ] Trim






- Remove screws - 4 - and remove assembly piece - B - downward.

- Disconnect harness connector - 5 - from turn signal - 3 -.

- Remove screws - 2 - and remove turn signal - 3 - from assembly piece - 1 -.

Installation

Install in reverse order of removal.

• Then perform a function test.