Rollover Protection Support Trim

Rollover Protection Support Trim

Removing

- Open roof completely.

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat

- Remove headrest covers. Refer to => [ Headrest Cover ] Headrest Cover.

- Remove the backrest. Refer to => [ Backrest ] Backrest

- Remove side trim. Refer to => [ Side Trim ] Side Trim

- Remove rear seat belt anchors. Refer to => [ Rear Seat Belt Anchors ] Rear Seat Belt Anchors

- Remove rollover protection trim. Refer to => [ Rollover Protection Trim ] Rollover Protection Trim

- Remove the three bolts - 1 - (1,5 Nm).

- Remove the three bolts - 2 - (1,5 Nm).

- Remove three screws - 3 - (1.5 Nm) in luggage compartment.

- Remove support piece - 4 - from vehicle.






Installation

- Install in reverse order of removal.