Water Drain Hoses, Cleaning

Water Drain Hoses, Cleaning

• For cleaning, an assisting tool is recommended, such as a speedometer driveshaft inner cable, approximately. 2300 mm (90.5 in.) long.






The front water drain hoses - 1 - are routed in the A-pillar - 2 - and end at the crossmember bulkhead. Cleaning is carried out from lock fitting - 4 - with roof open.



The rear water drain hoses - 3 - run through the main hinges and end in the rear wheel housings. Clean starting from the wheel housing and working outward. The wheel housing liner must be removed for this.