Rear Shelf Hinge with Assembly Frame

Rear Shelf Hinge with Assembly Frame

• The rear shelf hinge, assembly frame and rear lid hinge can be only be installed together at storage lock with Tensioning Tool (VAS 6389) and Tensioning Element (VAS 6373).

• All screws are microencapsulated and must always be replaced.

• The storage lock is the reference point for installing the rear shelf hinge and assembly frame.

• The storage lock can only be installed with the help of the alignment bracket set.






1 Rear Shelf Hinge with Assembly Frame

2 Bolt

• For securing assembly frame on rear shelf hinge.

• Quantity: 2

• 20 Nm

3 Side panel

4 Bolt

• Quantity: 2

• 20 Nm

5 Storage lock

6 Assembly frame

• For mounting locks.

7 Bolts

8 Rear lid hinge

9 Bolt

• For securing rear lid hinge to assembly frame.

• Quantity: 2

• 20 Nm

10 Bolt

• For securing rear shelf hinge to side panel.

• Quantity: 2

• 20 Nm

11 Rubber stop