Rear Shelf Stop Buffer, Installing

Rear Shelf Stop Buffer, Installing






- Adjust the stop buffer first. Refer to => [ Basic Setting for Newly Installed CSC Roof ] Basic Setting For Newly Installed CSC Roof.

- Rotate the stop buffer - 1 - 90° and remove it from the rear shelf - 4 -.

- Clean the area of the rear shelf - 4 - and stop buffer seal - 2 - with cleaner (D 195 850 A1).

Let the cleaner dry until there is no residue remaining.

- Coat the seal - 2 - with adhesive (AMV 195 KD1 01).

- Tighten the stop buffer immediately.