Glove Compartment Cooling

Glove Compartment Cooling

Removal

- Remove the glove compartment.

- Remove the hose for the glove compartment cooling - 1 - from the valve - 3 -.

- Remove the hose for the glove compartment cooling - 1 - from the connection - 2 - on the heater and A/C unit.






Installation

- Install the hose for the glove compartment cooling in reverse order. When doing this, note the following:

• The hose fits in only one position. The notch must align with the tab.

• The hose must not get bent or squeezed.