Fog Lamp

Fog Lamp

• Illustrations depict removal and installation of right fog lamp.

Removal

- Cover - 1 - can be pulled out of catches e.g. using a wire bracket from the vehicle tool kit - 2 -.






- Engage wire bracket into hole in cover and pull cover out of catches in - direction of arrow -.

- Remove mounting bolts - arrows - (1.5 Nm).






- Pull fog lamp housing out of bumper while paying attention to the lengths of the connected wires.

- Disengage and disconnect harness connector - arrow -.






Installation

Install in reverse order of removal, noting the following:

- Tighten the screws to the tightening specification. Refer to => [ Fog Lamps, Tightening Specifications ] [1][2]Fog/Driving Lamp.

- Check headlamp for function.

- Check headlamp adjustment and adjust headlamp if necessary.