Fuel Supply

Clean Working Conditions

When working on the fuel supply/injection system, pay careful attention to the following "5 rules":

• Thoroughly clean all connections and the surrounding area before disconnecting.

• Place parts that have been removed on a clean surface and cover them. Use lint-free cloths.

• Carefully cover over opened components or seal, if repairs are not performed immediately.

• Install only clean parts: remove the replacement parts from their packaging just before installing them. Do not use parts that have been stored loose (for example, in tool boxes, etc.).

• When the fuel system is open: avoid working with compressed air if possible. Do not move vehicle unless absolutely necessary.