Audio System - Obtaining Radio Codes
00 08 10Nov. 4, 2008
2014598 Supersedes T.B. Group 00 Number 07-06 dated Apr. 11, 2007 due to additional models, model year applicability and tester screen saver/power setting option Note under requirements.
Vehicle Information
Condition
PDI - Radio, Anti-Theft Radio Security Code Not Equipped
[New] vehicles will no longer be equipped with radio security codes from factory.
Tip:
Obtaining radio security code is considered part of the Perfect Delivery Inspection (PDI) process.
Technical Background
Radio security codes must be obtained using VAS 5051 or VAS 5052 through an on-line connection with GeKo.
Tip:
GeKo is a German acronym from the term Geheimnis und Komponentenschutz. In English this means Security and Component Protection. GeKo is the name used for the Security and Component Protection process.
Production Solution
Starting vehicle model year 2007.
Service
Requirements
^ VAS 5051 or VAS 5052 equipped with Ethernet card and security certificate, connected to Dealer's Local Area Network (LAN) and high speed Internet access.
^ MUST have minimum no-load charge of 12.5 V (failure to maintain voltage during update process can lead to control module failure) (use an approved battery charger INC940 to maintain battery voltage).
^ Operator must have a valid GeKo user ID and password.
GeKo ID and Password (requires Service Manager authorization). To obtain a GeKo ID and Password, see instructions on the "GeKo ID Request Form".
Your Service Manager can access the "GeKo ID Request Form" by selecting "All Service Reports & Publications".
NOTE:
Prior to launching VAS-PC application and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Document # VSE-08-18. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure.
Tip:
Follow all text prompts as indicated on each VAS 5051 or VAS 5052 screen.
Obtaining Radio Code
With the VAS 5051 or VAS 5052 connected to the vehicle:
^ Switch ignition ON.
^ From Start-up screen, select "Guided Function mode".
^ Select brand "Volkswagen".
^ Select appropriate vehicle.
^ Select "Radio system", -arrow-.
^ Select "Radio code inquiry", -arrow-.
^ Ensure VAS 5051 or VAS 5052 is connected for on-line communication, -arrow-.
Once communication is established:
^ Enter GeKo ID and password.
The VIN information and radio serial number will be identified.
Tip:
Touareg vehicles, the VIN will have to be manually entered.
Jetta, New Beetle and New Beetle Convertible, the radio serial code must be manually read in address word 56, MVB 81, and then manually entered.
A radio code will be generated.
^ Input generated radio code into radio.
Technical Support
Tip:
The following technical support contacts are for VW dealership personnel only.
For Radio Code questions or GeKo connectivity, contact the VW Support Center.
Warranty
Information only.
Required Parts and Tools
No Special Parts required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.