Hood

Hood

Removing





- Remove left and right spray nozzles - 6 -

- Unclip line - 2 - from hinge - 3 - and lid - 5 -.

- Remove line - 2 - from opening of hood - 5 -.

- Loosen hex nuts - 1 - at left and right (do not remove completely).

A second technician is required for the rest of the removal procedure.

- Remove gas-filled strut - 4 - at hood - 5 - => [ Gas Strut ] Service and Repair

- Remove hex nuts - 1 - only now and lift hood - 5 - from hinges - 3 -.

Installing

To install, perform the steps used for removal in reverse order.

- Tightening specifications: Hood hex head nut, 22 Nm

- Adjust hood - 1 - => [ Hood, Adjusting ] Adjustments

- Route line - 2 - as shown by - arrow -. If line is installed twisted, the line is kinked.