Front Bucket Seat Bracket and Operating Lever

Front Seats

Front Bucket Seat Bracket and Operating Lever

• Removing And Installing On The Left Side Of The Vehicle Is Described Here. Removing And Installing On The Right Side Is Identical.

Removal

- Remove Front Seat. Refer to => [ Front Seat ] Front Seat

- Remove Front Left Bucket Seat Trim. Refer to => [ Left Bucket Seat Trim ] Left Bucket Seat Trim

• As of my 2010, the bracket - 4 - is riveted to the seat pan with bolts - 1 - and - 3 -. Drill out the blind rivet to remove the bracket.

- Remove The Two Bolts - 1 - (3.5 Nm) And Remove Operating Lever - 2 -.

- Remove The Two Bolts - 3 - (3.5 Nm) And Remove Bracket - 4 -.





Installation

- To Install, Perform The Steps Used For Removal In Reverse Order.

• Use Pop Rivet Pliers (Vas 5072) To Remove The Blind Rivets.