Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Locking Pin (T10060A)

Removing

- Remove the noise insulation.

- If reinstalling the old belt, mark the direction of rotation of the belt.

With the Evaporative Emission (EVAP) Canister in the Engine Compartment

- Detach the EVAP canister and put aside.

Continuation for All

- Rotate the belt tensioner in the - direction of the arrow - to release tension on the ribbed belt.





- Secure the tensioner using (T10060A).





- Remove the ribbed belt.

Installing

- Installation is performed in the reverse order of removal, noting the following:

• If reinstalling the old belt, note the previously marked direction of belt rotation and be sure that it is seated correctly on the pulleys.

• Lastly, install the ribbed belt on the Air Conditioning (A/C) compressor.

When finished, always perform the following work:

- Start the engine and check the belt running.