Front Bumper Attachments, GTI

Front Bumper Attachments, GTI

• Depending on the version, the removal and installation process may be slightly different.

• The GTI vent grille has a diamond-shaped pattern.





1 Cover

• Material PP/EPDM

• Removing and Installing => [ Front Bumper Cover, GTI ] Front Bumper Cover, GTI

2 Left protective molding

• Material PP/EPDM

• Locked to cover.

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.

3 Side marker lights

• left and right

• Not for all countries.

4 Left vent grille

• Removing:

- Remove screw - 4 -

- Starting at front - arrow a -, loosen from locking tabs, then remove from cover toward center of vehicle - arrow b -.

5 Bolt

• 1.5 Nm

6 Upper part of spoiler

• Material PC/ABS

• Locked to cover.

• Only to be removed with bumper removed and lower part of spoiler unscrewed.

7 Lower part of spoiler

• Only for GTI.

• Material PC/ABS

• Screwed to the upper part of spoiler and noise insulation.

8 Bolt

• Quantity 7

• 1.5 Nm

9 Center vent grille

• Can only be removed with radiator grille removed.

• Center of vent grille can be carefully loosened from latches from outside with a plastic wedge and removed.

10 Right vent grille

• Removing:

- Remove screw - 4 -

- Starting at front - arrow a -, loosen from locking tabs, then remove from cover toward center of vehicle - arrow b -.

11 Right protective molding

• Material PP/EPDM

• Locked to cover.

• Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.