Interior Lamp

Roof Trim Lamps and Switches

Interior Lamp

Special tools, testers and auxiliary items required

• Trim removal wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Turn off the ignition and all electrical consumers.

- Carefully pry diffusion lens out of interior light - arrow - using trim removal wedge (VAS 3409) or a screwdriver.





- Push contact plate - 1 - of light to the side - arrow - and remove soffit - 2 - with contact plate out of interior light.





- Remove contact plate - arrow - from damaged soffit.





- Insert contact plate onto new soffit (12V, 10 W).

Installing

Install in reverse order of removal.