Diagram 622/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Charge Air Pressure Sensor, Intake Manifold Runner Position Sensor, Secondary Air Injection (AIR) Sensor 1, Engine Speed (RPM) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G31 - Charge Air Pressure Sensor Locations

G336 - Intake Manifold Runner Position Sensor Locations

G609 - Secondary Air Injection (AIR) Sensor 1 Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T4ak - 4-Pin Connector

T6aq - 6-Pin Connector, on engine, front

T14a - 14-Pin Connector, near battery

T60 - 60-Pin Connector

(D101) - Connection 1 (in engine compartment wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

Previous Diagram 622/9 (Tracks 99-112)

Next Diagram 622/11 (Tracks 127-140)