Diagram 622/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Turbocharger Recirculating Valve, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Wastegate Bypass Regulator Valve, Intake Manifold Runner Control (IMRC) and Camshaft Adjustment Valve, Secondary Air Injection (AIR) Solenoid Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

N75 - Wastegate Bypass Regulator Valve Locations

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

N205 - Camshaft Adjustment Valve 1 Locations

N249 - Turbocharger Recirculating Valve Locations

N316 - Intake Manifold Runner Control (IMRC) Valve Locations

T4x - 4-Pin Connector, on coolant fan, bottom left

T14a - 14-Pin Connector, near battery

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(D111) - Connection 9 (in engine compartment wiring harness)

(D180) - Connection (87a) (in engine compartment wiring harness)

(D189) - Connection (87a) (in engine pre-wiring wiring harness)

*** - Coolant Fan Connector

Previous Diagram 622/11 (Tracks 127-140)

Next Diagram 622/13 (Tracks 155-168)