Diagram 621/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Intake Manifold Runner Position Sensor, Engine Speed (RPM) Sensor, Injectors





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G336 - Intake Manifold Runner Position Sensor Locations

N30 - Cylinder 1 Fuel Injector Locations

N31 - Cylinder 2 Fuel Injector Locations

N32 - Cylinder 3 Fuel Injector Locations

N33 - Cylinder 4 Fuel Injector Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T6aq - 6-Pin Connector, on engine, front

T8i - 8-Pin Connector, on engine, front

T60 - 60-Pin Connector

(D108) - Connection 6 (in engine compartment wiring harness)

Previous Diagram 621/9 (Tracks 99-112)

Next Diagram 621/11 (Tracks 127-140)