Diagram 176/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Clutch Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F125 - Multi-Function Transmission Range (TR) Switch Locations

G476 - Clutch Position Sensor Locations

J104 - ABS Control Module Control Modules in Front Part of Vehicle

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

J743 - Direct Shift Gearbox (DSG) Mechatronic Direct Shift Gearbox 02E (DSG)

T5m - 5-Pin Connector

T10q - 10-Pin Connector, on transmission

T20e - 20-Pin Connector

T26a - 26-Pin Connector, on ABS with EDL Control Module

T47 - 47-Pin Connector, on ABS with EDL/ESP Control Module, through April 2008

T47b - 47-Pin Connector, on ABS with ESP Control Module (Hill Start Assistance), through April 2008

T47c - 47-Pin Connector, on ABS with EDL/ESP Control Module, from May 2008

T94 - 94-Pin Connector

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections In Interior

(367) - Ground Connection 2 (in main wiring harness)

(382) - Ground Connection 17 (in main wiring harness)

(389) - Ground Connection 24 (in main wiring harness)

(605) - Ground Connection (on upper steering column) Overview of Ground Connections In Interior

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with manual transmission

_ . . _ - Only models with direct shift gearbox 02E (DSG)

_ . _ . _ - Only engine code BPY

Previous Diagram 176/16 (Tracks 197-210)

Next Diagram 176/18 (Tracks 225-238)