Alternator

Generator (BPY, BWA, CBFA, CCTA)










Tightening sequence for the sub-assembly bracket on the cylinder block, vehicles with A/C system

Procedure
- Position sub-assembly bracket on cylinder block.

NOTE: Insert all bolts before tightening to the specification.

- Tighten sub-assembly bracket mounting bolts in the following sequence:

A - Hex collar bolt, M10 x 45, 40 Nm
B - Hex collar bolt, M10 x 45, 40 Nm
C - Hex collar bolt, M10 x 45, 40 Nm
D - Hex collar bolt, M10 x 45, 40 Nm
E - Hex collar bolt, M10 x 45, 40 Nm
F - Hex collar bolt, M10 x 45, 40 Nm