Shafts and Selector Rods, Installed Positions

Shafts and Selector Rods, Installed Positions





1 Input shaft
2 Output shaft, 1st to 4th gears
3 Output shaft 5th/6th and reverse gear
4 Reverse shaft
A Selector rod for 3rd and 4th gear
B Selector rod for 1st and 2nd gear
C Selector rod for 5th and 6th gear
D Reverse gear shift fork 1

• 1 On some transmissions, the bearing on the reverse gear shift fork on the shift rod for 5th and 6th gear shift fork - C -. reverse gear shift forks differences, refer to => [ Reverse Gear Shift
Fork Differentiation ] Shift Forks.

*