Scan Tool Testing and Procedures

Radio Code, Checking with Vehicle Diagnosis Tester

Diagnostic tool access requirements

• The diagnostic tool is connected to the central database (Carport, Fazit) via the Central Partner Network (CPN).

• The existing access authorization for the "GeKo" system

• The radio codes can be requested in the central database and shown on the Vehicle Diagnosis Tester display.

• To activate the radio, the codes must be entered via the radio keys, as before.

Procedure

- Connecting the vehicle tester.

- Switch the ignition on.

- Touch the "GUIDED FUNCTIONS" button/field on the screen.

- Press the > button to confirm.

- Select the following one after the other:

• Brand

• Type

• Model year

• Engine Code

- Confirm the VIN.

- Select the following one after the other:

• "Radio system".

• "Request radio code".

- Perform code request according to instructions from "GUIDED FUNCTIONS".

- Complete the code request as follows:

- Press the "Go to" button - arrow - on display.

- Press the "end" button on the display.

- Press the "end" button in the "end" menu.

- Turn off ignition and disconnect diagnostic connection.