Bearing Bracket

Bearing Bracket

Removing

- Remove housing. Refer to => [ Housing ] Housing.

- Remove door handle. Refer to => [ Door Handle ] Door Handle.

- Remove outer door panel. Refer to => [ Outer Door Panel ] Outer Door Panel.

- Remove retaining rubber. Refer to - 4 - upward from guide pin.

- Pull bearing bracket - 1 - in - direction of arrow - with guide pin - 2 - out of mounts - 3 -.





Installing

- Slide bearing bracket - 1 - with guide pin - 2 - into mounts - 3 -.

- Secure retaining rubber - 4 - on guide pin and mounting pin on bearing bracket mount.

Further installation is in reverse order of removal.