Engine Lubrication: Specifications

Fastener Tightening Specifications





• 1 Always replace

• 2 Note the different length of bolts, refer to => [ Balance Shaft Gear Bolt Allocation ] Oil Pump with Balance Shaft Drive.

• 3 For bolt tightening clarification, refer to => [ Oil Pump with Balance Shaft Drive Assembly Overview ] Oil Pump with Balance Shaft Drive Assembly Overview and see - items 6 and 8 -.

Oil Pan Bolt Tightening Sequence and Specification





- Tighten the oil pan bolt as follows:

• Tighten the oil pan to cylinder block to bolts - 1 through 20 - very lightly in a diagonal sequence.

• Tighten the oil pan to transmission bolts - arrows - lightly.

• Tighten the oil pan to cylinder block bolts - 1 through 20 - again, lightly in a diagonal sequence.

• Tighten the oil pan to transmission bolts - arrows - to 40 Nm.

• Tighten the oil pan to cylinder block bolts - 1 through 20 - in a diagonal sequence to 15 Nm.