Diagram 147/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module, Data Bus On Board Diagnostic Interface, Power Supply Relay 2 (terminal 15)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

E1 - Light Switch

E20 - Instrument Panel Illumination Dimmer Switch

J285 - Instrument Cluster Control Module Component Locations Locations

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

J681 - Power Supply Relay 2 (terminal 15)

J682 - Power Supply Relay (terminal 50) Locations

SA5 - Fuse 5 (on fuse panel A)

SB12 - Fuse 12 (on fuse panel B)

SC1 - Fuse 1 (on fuse panel C) Locations

SC2 - Fuse 2 (on fuse panel C) Locations

SC13 - Fuse 13 (on fuse panel C) Locations

SC25 - Fuse 25 (on fuse panel C) Locations

T8e - 8-Pin Connector

T9b - 9-Pin Connector

T10h - 10-Pin Connector

T20 - 20-Pin Connector

T36 - 36-Pin Connector

T40 - 40-Pin Connector

(382) - Ground Connection 17 (in main wiring harness)

(507) - Threaded Connection - terminal 30 (on battery fuse holder)

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A167) - Plus Connection 3 (30a) (in instrument panel wiring harness)

(A192) - Plus Connection 3 (15a) (in instrument panel wiring harness)

(A199) - Plus Connection 4 (15a) (in instrument panel wiring harness)

(B169) - Plus Connection 1 (30) (in passenger compartment wiring harness)

Next Diagram 147/3 (Tracks 15-28)