Cylinder Head Assembly: Tools and Equipment

Special Tools

Special tools, testers and auxiliary items required

• Straight Edge 500 mm (VAS 6075)

• Thrust Piece (T10368)

• Compression Tester (V.A.G 1763)

• Adapter (V.A.G 1763/6)

• Locking Pin (T10060 A)

• Thrust Piece (T10174)

• Spark Plug Removal Tool (3122 B)

• Valve Seal Removal Tool (3364)

• Valve Stem Seal Driver (3365)

• Adapter (T40012)

• Valve Cotters Asm/Disasm Device (VAS 5161)

• Guide Plate for FSI Engine (VAS 5161/19B)

• Dial Gauge Holder (VW 387)






• Dial Gauge 0-10 mm (VAS 6079)






• Torque Wrench (V.A.G 1783)






• Open End Spanner Insert AF 10 (V.A.G 1783/1)






• Engine Support Bridge (10-222 A)






• Engine Support Basic Set (T40091)






• Shackle (10-222 A/12)






• Bits (T10099)






• Thrust Piece (T10354)






• Pulling Hook (T20143)






• Puller (T10394)






• Puller (T10055)











Special tools, testers and auxiliary items required

• Engine Sling (2024 A)

• Engine Support (T10014)

• Assembly Tool (T10352)

• Counter Hold Tool (T10355)

• Locking Pin (T40011)

• Ignition Coil Puller (T40039)






Special tools, testers and auxiliary items required

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Torque Wrench (40-200 Nm) (V.A.G 1332)

• Shop Crane-Load Cap = 700-1200 KG (VAS 6100)

• Engine Bung Set (VAS 6122)

• Drip Tray for VAS 6100 (VAS 6208) or (V.A.G 1306)

• Polydrive Bit and Drive Socket (T10070)