Operation CHARM: Car repair manuals for everyone.

Diagram 65/28 (Tracks 365-378)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G44 - Right Rear ABS Wheel Speed Sensor Wheel Speed Sensors and Pad Sensors

G47 - Left Front ABS Wheel Speed Sensor Wheel Speed Sensors and Pad Sensors

J104 - ABS Control Module ABS Control Module (models with ABS / EDL/ASR) -J104-

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

T26a - 26-Pin Connector

T47 - 47-Pin Connector

(D149) - Connection (speed sensor rear, right -), in wiring harness engine compartment Location: In main wiring harness between wiring circuits for N201 - Rear Passenger's Side Airbag (driver's side) Igniter and N202 - Rear Passenger's Side Airbag (front passenger's side) Igniter

(D184) - Left Front Speed Sensor + Connection (in engine wiring harness) Location: In main wiring harness between wiring circuits for Data link Connector and connector T28 at left A-pillar

Previous Diagram 65/27 (Tracks 351-364)

Next Diagram 65/29 (Tracks 379-392)