Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2008 >> Jetta GLI (1K2) L4-2.0L Turbo (CCTA) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module, through 10.08 >> without Anti-Theft Protection

without Anti-Theft Protection







without Anti-Theft Protection

• If the Engine Control Module (ECM) will be replaced, connect the vehicle diagnostic tester and perform the "Replacing Engine Control Module" guided function.

Removing

- Turn off the ignition.

- Remove the wiper arms and the plenum chamber cover.

- Remove the plenum chamber bulkhead.

- Disengage the forward harness connector - 1 - from the ECM and disconnect it.






- Pry up the locking mechanism - 2 - slightly.

- Then, slide the ECM out of retainer - arrow -.

- Now, disengage rear harness connector from the ECM and disconnect it.

Installing

- Connect the rear harness connector to the ECM and engage it.

- Slide the ECM onto the retaining plate.

- Press the catch - 2 - against the ECM.






- Now, connect the front connector - 1 - to the ECM and engage it.

- Install the plenum chamber bulkhead.

- Install the wiper arms and the plenum chamber cover.
pro multis · About Operation CHARM