Airbag Spiral Spring/Return Spring With Slip Ring (F138)

Airbag Spiral Spring/Return Spring With Slip Ring (F138)


When removing, the Airbag Spiral Spring/Return Spring With Slip Ring (F138) must not be twisted out of the center position and the wheels must be straight ahead.

Removal

- Lift the retainers - arrows - on airbag spiral spring/return spring with slip ring - 1 - slightly and pull airbag spiral spring/return spring with slip ring back from steering column.






Installation

Installation is performed in the reverse order of removal. Note the following:

The airbag spiral spring/return spring with slip ring must be in the center position and the wheels must be turned to the straight-ahead position when installing the airbag spiral spring/return spring with slip ring (F138).

The airbag spiral spring/return spring with slip ring center position, which depends on the manufacturer, is depicted as follows:

• The color marked (black square) band - arrow - must be located in viewing window - 1 -.






• The color marked (yellow) band - arrow - must be located in viewing window - 1 -.






• If a new Steering Angle Sensor (G85) is installed, then the work procedure => [ Steering Angle Sensor, Basic Setting ] Steering Angle Sensor (G85), Basic Setting must be performed.