Sensor, Repairing

Sensor, Repairing

If a new parallel parking assistance sensor is installed, the sensor head must first be painted to match the color of the bumper cover. The following requirements must be observed when painting the sensors to ensure the parking aid system will work correctly.

Sensor, Painting

- Remove the decoupling ring (black silicone ring) from the new sensor head.

- Use isopropyl alcohol to remove the grease from the black sensor head - 1 - in the area to be painted - 2 -.






- Paint the sensor in the area to be painted - 2 - the same color as the bumper cover.

• Paint application dimension - B - is 3 mm (+ maximum 2 mm).

- When the paint has dried, reinstall the decoupling ring (black silicone ring) on the sensor head.


• Do not bend the coupling ring.

• Using a damaged coupling ring can cause malfunctions.

• Replace damaged coupling rings.