Adjusting Panel Seal

Adjusting Panel Seal

- Using a strip of cardboard about 0.3 mm thick (e.g. business card), check if pretension between panel seal - 2 - and body is even all around.





• Cardboard should slide through gap with firm resistance.

If this is not the case:

- Removing glass panel for sunroof, refer to => [ Sunroof with Glass Panel ] Sunroof with Glass Panel.

- If pretension is insufficient, the panel seal - 2 - can be pressed open using a trim removal wedge (3409) - 1 -.

- If pre-tension is too high, press panel seal - 1 - together all around using application roller for door insulation foil (3356).